Epoxy Flooring – Chicago Homes Get Long Lasting Solutions to Floors that Sink, Creak and Crumble

Epoxy Flooring – Chicago Homes Get Long Lasting Solutions to Floors that Sink, Creak and Crumble

Homes get old; and when they do the floor shows the first signs of aging because it’s literally the most downtrodden part of the house. The weather isn’t kind to your floors either, as the moisture or humidity it brings inside the home tends to seep into the joints and into the inconspicuous gaps. There are all sorts of reasons that have caused your floor to sink, creak and crumble and in spite of the repairs made; all of these are bound to recur over time. So, if you have no other choice but to give your floor the makeover it needs, consider a more permanent solution.

Think of epoxy flooring as many Chicago homeowners do. It may not be the cheapest solution at the moment, but in the long run, it will prove to be the most cost-efficient remedy to a never-ending problem. Flooring problems are in fact the most complicated, which a cheap fix cannot resolve with the most long-lasting result.

Epoxy flooring gained popularity in industrial settings because of its tough adhesive qualities and strong resistance against heaviness and weathering. This is why most homeowners tend to have a preconceived notion of floors that look stiff and abrasive for residential purposes. But not anymore, further technological developments have made epoxy flooring look as sleek and attractive as marble or granite flooring. Color and design variations are now available; not just the typical silvery-grey solid floor but granite-speckled surface in different warm earth colors.

Epoxy or polyurethane flooring is widely popular for its strong cement-like characteristic, low propensity for shrinkage and high-resistance against stress and scrapes. It’s basically made of tightly cross-linked polymers that assume a state of permanent hardness when heated or treated. It does not react to salt or acid and does not take in water.

Type of Epoxy Flooring to Look For

Be in the know that there are three types of epoxies; there are the 100% solids, the solvent-based and the water-based. Be wary of low-priced offers for this type of flooring because there’s a likely chance that the type of epoxy flooring you’ll end up with is either the solvent-based or the water-based. The high-grade type is the 100% solids and has been proven in industrial sites as the most efficient in terms of strength, adhesion, resistance and endurance. It requires professional handling because once the epoxy substance has been mixed with a reaction-initiating agent; its spreadable life is brief. This means you also have to ascertain the competency level of the contractor with the low-priced deal.

You may be sweet-talked into considering the solvent-based or the water-based epoxy because it’s a user-friendly type and ideal for the do-it-yourself homeowner. The possibility of minimizing your epoxy flooring cost may seem too hard to resist; but keep in mind that the quality of the flooring system you’ll end-up with will not be the same as that of the 100% solids type. Low quality epoxies apply thinly yet require a longer drying-time. If in doubt about the epoxy flooring, know that Chicago flooring professionals furnish customers with a product data sheet and the government required Material Data Safety Sheet (MDSS); as this allows customer to know more about the product and its composition.

 

Testimonials